Yes. Our gates are built to the same regular and wide picket dimensions as the railing itself, so a dealer or contractor can add one into an existing run using the same post spacing the original installation used.
Aluminum railing accessories for added functionality
We built our aluminum accessory line to work with our railing systems, not around them. Every gate, adapter, and bracket on this page ships to fit our regular picket, wide picket, cable rail, and glass railing systems, so contractors and dealers can quote a complete job instead of hunting for a third-party workaround.
Gates
Our aluminum gates let you put a walk-through opening anywhere a fence or railing run needs one, without switching materials or finishes partway through the job. They are built for our regular picket and wide picket systems, welded from the same aluminum stock as the railing itself, and finished with the identical powder-coat process so the gate disappears into the run instead of standing out as an add-on piece.
Each gate ships in 36 inch and 42 inch heights and swings a full 180 degrees, 90 degrees in and 90 degrees out, which matters on pool enclosures and tight side yards where a one-direction swing will not clear. Every gate arrives with its latch, catch, hinges, and hardware already in the box, so a dealer does not need to source separate closures to complete the sale. It carries the same 25 year warranty as our other accessories and meets code for guard applications, so it can go in anywhere the surrounding railing is doing guard duty rather than decorative fencing.
GatesDrink Rail Adapters
The drink rail adapter turns a standard top rail into a flat surface wide enough to set down a drink, a plate, or a phone, and it runs over the post so the transition looks continuous rather than interrupted. It fits our picket, cable, and glass railing systems, which covers most of what a dealer will already have on a job.
We do not sell the cap material with the adapter. It is designed to accept a cap board up to 6 inches wide in wood, composite, or vinyl, so the installer matches it to whatever decking material is already on the job rather than being locked into a single look. The adapter ships in a 96 inch length with the tech screws needed to fasten it, and because the cap sits on top rather than being bonded to it, a homeowner can swap the cap material down the road without replacing the adapter underneath. It carries the standard 25 year warranty and is available in all our standard colours, so the hardware stays hidden under whatever finish goes on top.
Drink Rail AdapterFascia Mount Brackets
The fascia mount bracket moves the railing posts off the deck surface and onto the outside face of the rim joist or fascia board, which gives back every inch of usable deck space that a surface mounted post would otherwise take up. It works with all of our aluminum railing systems, so it is a mounting decision, not a system decision, and it does not restrict which infill the dealer can pair it with.
Since the post attaches through bolted to structural framing rather than to the top of the decking, the connection point sits against the strongest part of the deck’s frame instead of the weakest. That makes fascia mounting a common choice on decks where the railing has to clear an edge, a low wall cap, or a narrow surface where a standard post base will not sit flat. Fascia posts and brackets are available in the same finish and colour range as the rest of the line, so a fascia mounted run looks identical to a surface mounted one from a few feet away.
Fascia Mount BracketsPipe Handrails
Our pipe handrail system is built for stairs, ramps, decks, and walkways on residential and multi-family projects, and it comes as a full kit (pipes, brackets, returns, and extensions), so an installer is not stuck sourcing individual fittings to finish a run. It is powder-coated aluminum, which means no rust and no repainting over the life of the installation, and it is engineered to meet building code handrail requirements out of the box.
Pipe handrail is graspable by design, and it installs on either side of a stairway or down the centre where code calls for an intermediate rail on a wider run. It carries the 25 year warranty and ships in textured black and gloss white, the two finishes that see the most use on commercial and multi-family stair applications.
Pipe HandrailsStair Brackets
The stair bracket is what lets our railing and picket infill follow a stair stringer’s pitch instead of stepping down in a series of flat, level sections. It mounts to the post and holds the top and bottom rail at the stair’s actual angle, so the infill panel between them stays parallel to the nosing line the way code expects a stair guard to run.
Because the bracket sets the angle at the post connection rather than requiring a custom-cut rail on site, installers can fit it to the stair pitch in front of them without special order parts or a trip back to the shop. It is finished and warrantied the same as the rest of the accessory line, so a stair section matches the level runs on either side of it without a visible seam in colour or hardware.
Stair BracketsFrequently Asked Questions
Do I need to buy the cap board with the drink rail adapter?
No. The adapter is hardware only. You choose the cap material, wood, composite, or vinyl, up to 6 inches wide, so it matches the decking already on the job.
Will a fascia mounted railing look different from a surface mounted one?
No. The posts and brackets come in the same finishes as our surface mounted line, so once the railing is installed the mounting method is not visible from normal viewing distance.
Does the pipe handrail meet code on its own?
The system is engineered to meet building code handrail requirements, but the diameter, height, and clearance still need to match the specific provincial/state code for the project, since requirements vary slightly by jurisdiction.
Can the stair bracket be used with any of Vista's railing systems?
Stair brackets are matched to the railing system and infill being installed on the stair run, so confirm the system with your dealer before ordering to make sure the bracket, post, and infill are compatible.
What is the warranty on these accessories?
Our aluminum accessories, including gates, drink rail adapters, fascia brackets, pipe handrails, and stair brackets, carry a 25 year warranty.
Where can I buy these accessories?
We sell through our dealer network rather than direct to the public. Contact us at 1-800-667-8247 or sales@vistarailings.com and we can point you to a stocking dealer near you.
